Try turning in two or so head bolts not quite touching reinstall the plugs
and spin the engine over with the starter the compresion should POP them.
Look at a tork chart and make sure you have ALL the bolts out. Lots of times
people miss one or two under crud!
GEORGE!!
90 DAK conv (for sale)
89 DAK conv sport
96 CC
----- Original Message -----
From: "Wisotzkey, Rich" <Rich.Wisotzkey@gd-wts.com>
To: <dakota-truck@buffnet.net>
Sent: Friday, January 26, 2001 6:30 PM
Subject: DML: Head Removal Help
> I'm pulling the heads off the 'ol 318 tonight. At least I'm trying to. I
> removed the head bolts, but can't get the heads to come loose from the
> block. What's the best (safest) way to get them to break free so I don't
> scratch either surface?
> Rich - Ashburn, VA
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:43 EDT