Thanks Tom! Will do.
Rich
-----Original Message-----
From: Tom Slick North [mailto:prodog@swbell.net]
Sent: Friday, January 26, 2001 8:27 PM
To: dakota-truck@buffnet.net
Subject: DML: RE: Head Removal Help
Hey Rich,
Try using a rubber mallet and tap on the corners of the heads...
Later,
Tom "Slick"
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Wisotzkey, Rich
Sent: Friday, January 26, 2001 5:31 PM
To: 'dakota-truck@buffnet.net'
Subject: DML: Head Removal Help
I'm pulling the heads off the 'ol 318 tonight. At least I'm trying to. I
removed the head bolts, but can't get the heads to come loose from the
block. What's the best (safest) way to get them to break free so I don't
scratch either surface?
Rich - Ashburn, VA
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:44 EDT