I want to first open up the exhaust side of things before I feed it more
air. Headers and or muffler first.
-- Richard ""WOT or waiting at a Red"" <dakatack@home.com> wrote in message news:008501c08a64$e3acf6e0$6026b018@potlnd1.or.home.com... > Are you going to port and polish it? > > ----- Original Message ----- > From: "Richard R" <richster@san.rr.com> > To: <dakota-truck-moderator@bent.twistedbits.net> > Sent: Monday, January 29, 2001 3:52 PM > Subject: DML: Re: Re: Re: Question on TB for the 2000 4.7 > > > > Thanks Patrick! It is deemed a 68mm per the part numbers. The Quick D > > intake made it easy to check. > > > > > > -- > > Richard > > ""WOT or waiting at a Red"" <dakatack@home.com> wrote in message > > news:003d01c08a47$a42b8300$6026b018@potlnd1.or.home.com... > > > Richard > > > > > > There is a stap on the top of the TB > > > 53013241AC is a 65mm > > > 53013163AA is a 68mm > > > > > > Also it's stamped with the size on the blade. You will need to use a > > mirror > > > to see it. > > > > > > Patrick O'Day > > > > > > ----- Original Message ----- > > > From: "Richard R" <richster@san.rr.com> > > > To: <dakota-truck-moderator@bent.twistedbits.net> > > > Sent: Monday, January 29, 2001 1:29 PM > > > Subject: DML: Re: Question on TB for the 2000 4.7 > > > > > > > > > > I have a 2001 QC 4.7 built in October of 2000, how can I tell if I > have > > > the > > > > 68mm throttle body? > > > > > > > > -- > > > > Richard > > > > <RobertE.Tucker@gunter.af.mil> wrote in message > > > > news:6E8C7034C8875D41A80E36C22E15B43016FA0D@FSJUBJ08... > > > > > I am looking to upgrade the TB on my 2000 4.7L and have a question: > > > Would > > > > > it be better to replace the original 65MM TB on the 2000 4.7L with a > > > > QuickD > > > > > version, or to simply replace it with the 68MM TB from the 2001 > 4.7L? > > > > > > > > > > Bob Tucker > > > > > 2000 CC, 4.7, 3.92 ASD, > > > > > IP Cold Air Intake > > > > > > > > > > > > > > > > > > > >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:48 EDT