My crank sensor died last tuesday, yet I was able to drive around... only
over 2500RPMS would she cough, spit, sputter, blow black smoke, and
backfire...
I strongly suggest checking this...
*-=-=-=-=-=-=-=-=-=-=-=-=-*
Tim Berry (97 Dakota Club Cab)
Chesapeake, VA
Best 1/4: 13.50@101.91
296.8HP / 349.0TQ (SAE Corrected)
*-=-=-=-=-=-=-=-=-=-=-=-=-*
> If your crankshaft position sensor was gone, your truck would generally
not
> start or it would crank over but not fire up. Also, if it's suspected
that
> this
> sensor were a candidate, it is most likely due to with its electrical
> connector
> (loose, broken wire, rust, etc.) rather than the sensor itself.
>
> Bob
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:07 EDT