Sounds like a good time. I got my 4x4 to brave the snow & ice on my way to
work & dont have a good place to go 4-wheelin for fun. But I remember the
days in OK city when we all spent lots of time muddin' at lake Draper...
----- Original Message -----
From: Andy Levy <andylevy@bigfoot.com>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Saturday, February 03, 2001 5:29 PM
Subject: Re: DML: cowl panel -short TG
> Just go offroading with the Adam Blaster and I guarantee you'll not ever
> have to worry about that panel again :)
>
> -andy
>
> "Kevin L. Miller" wrote:
> >
> > Just another tip I came up with today...The cowl panel under the front
of
> > the truck with the little round door to open & reach the oil filter on
the
> > 4.7.
> > I hate the oil running down & dripping on this panel when changing the
oil.
> > but the clips that hold the panel in are a pain to get ahold of & pry
out, &
> > after a couple times they're shot...Went to Lowes & found push-in clips
> > (seen these type on interior panels) that have a center pin. pull the
center
> > pin out & the clip pops right out. push the clip in & insert the pin -
holds
> > tight.....what a lifesaver.
> >
> > kmrcdd@swbell.net
> > Kevin
> > 2000 4x4 QC 4.7L auto SLT+ 3.55 LSD Skids ,K&N, MAAP Nerfs, SS bedrails
> > Catch-alls, Deflectors, White/Silver 180 TS, Bosch 4418 +4 Mobil-1
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:07 EDT