Alek
I use some 3/8" inch tubing that connects to my used oil container via a
brass nipple I got from the hardware store. The oil never sees the light of
day. No muss, no fuss.
Patrick O'Day
2000 Dakota 4x4, 4.7L, CC
Ztube w/9inch big mouth filter
68 MM TB Ported and Polished
Mobil 1
----- Original Message -----
From: "Alek Benedict" <alek@earthling.net>
To: <dakota-truck@BUFFNET.NET>
Sent: Thursday, February 08, 2001 12:40 PM
Subject: DML: RE: Re: Oil change/Fumoto valve
> : The threads on the F106 are 14mm with a 1.50 pitch thread
> : The threads on the F111 are 14mm with a 1.25 pitch thread
>
> Then I probably do need the F111. Thank you for the information.
>
> : the F111. I order them with the N added so it comes with a nipple that
> : accepts 3/8" id tubing.
>
> Why do you order them with the nipple? Just curious, what do you use
> the nipple for?
>
> --
> Alek Benedict with a techno beat.
> alek@earthling.net
>
> "My mind is wide asleep, my conscious deep awake ..
> the promises I keep are not the ones I make.
> I count the caustic causes, I lost out of regret ..
> a surplus of good intentions don't provide me with content.
> All I want is just a little content."
> - Fat Mike, NOFX
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:11 EDT