I don't know what the others use, but the 4.7 uses the 106 or 106N (N for
nipple). Easily gotten from Summit (www.summitracing.com) as part number
FUM106N. The thread size is 14mm-1.5.
I use a hunk of 3/8 ID fuel line and just take it off each time.. piece of
cake.
/Curt
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> [mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Crit Bennett
> Sent: Thursday, February 08, 2001 6:19 PM
> To: dakota-truck@BUFFNET.NET
> Subject: Re: DML: Oil change/Fumoto valve
>
>
> Does the 4.7 use the same Fumoto valve as the 3.9, 5.2, and 5.9?
> What are you
> guys doing with the tubing, just tucking it away or taking it off?
>
> Crit
>
> ------------------------------
>
> Date: Thu, 8 Feb 2001 15:03:50 -0600
> From: "Alek Benedict" <alek@earthling.net>
> Subject: DML: RE: RE: Re: Oil change/Fumoto valve
>
> : Question - What is this Fumoto Valve y'all are talkin' about??
>
> Well, "Fumoto Valve" is the name of the company that makes it.
> [ http://www.fumotovalve.com ]
>
> It's basically a valve that replaces your oil drain plug.
> Then, when you drain your oil, you just flip a lever and it
> opens the valve, you don't have to actually unscrew a drain
> plug.
>
> If you change your oil yourself it's incredibly useful,
> provided you can figure out which one you need. ;)
>
> See the web site for pictures and such.
>
> - --
> Alek Benedict with a techno beat.
> alek@earthling.net
>
> "My mind is wide asleep, my conscious deep awake ..
> the promises I keep are not the ones I make.
> I count the caustic causes, I lost out of regret ..
> a surplus of good intentions don't provide me with content.
> All I want is just a little content."
> - Fat Mike, NOFX
>
> ------------------------------
>
>
> -------------------------------------------------
> Sent through Cyberbuzz- A Server for the Students
> http://cyberbuzz.gatech.edu/
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:11 EDT