That would be correct-amundo. The harness itself is $300. That doesn't
include any of the sensors or any of the logic that goes in the CTM. Good
luck. The OHC is the smallest of your worries.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of andy levy
Sent: Thursday, February 15, 2001 9:04 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Re: Overhead Console Computer
I hope you got all the wiring for the OHC when you got it. None of the
required wiring & temperature sensors are in your truck right now.
""Ryan Stewart"" <firebird@kymtnnet.org> wrote in message
news:005601c097d0$b6f560a0$0193a8c0@Anywhere.com...
> Has anyone who didn't have the OHC in their truck stock installed it
> themselves? I have the computer here, just need to install it! Has nayone
> done this and give me any pointers? Would anyone be able to scan me a copy
> of the wiring diagram? It should be in the FSM. All help is appreciated!
>
> -Ryan
> 99 DA RC R/T
> I want the OHC in there so bad!
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:17 EDT