I don't think it's as simple as that. I'll check again but I believe you
may have to have a new CTM as well. I know that a part of the OHC connects
to the CABS as well to get miles. There's also a sensor so it can determine
fuel capacity. In any case I don't have the diagrams for the 99's. These
things change from year to year.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Ryan Stewart
Sent: Thursday, February 15, 2001 9:34 PM
To: dakota-truck@BUFFNET.NET
Subject: DML: Re: Re: Overhead Console Computer
I don't. Yeah, I know I'm gonna need to wire it, that's why I want the
wiring diragrams).
-Ryan
99 DA RC R/T
Sunday job......I hope..... Got the OHC free though. :D
----- Original Message -----
From: "andy levy" <andylevy@bigfoot.com>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Friday, February 16, 2001 12:03 AM
Subject: DML: Re: Overhead Console Computer
> I hope you got all the wiring for the OHC when you got it. None of the
> required wiring & temperature sensors are in your truck right now.
>
> ""Ryan Stewart"" <firebird@kymtnnet.org> wrote in message
> news:005601c097d0$b6f560a0$0193a8c0@Anywhere.com...
> > Has anyone who didn't have the OHC in their truck stock installed it
> > themselves? I have the computer here, just need to install it! Has
nayone
> > done this and give me any pointers? Would anyone be able to scan me a
copy
> > of the wiring diagram? It should be in the FSM. All help is appreciated!
> >
> > -Ryan
> > 99 DA RC R/T
> > I want the OHC in there so bad!
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:17 EDT