When we o the 0-60 and 1/4 mile runs, everything will be out of the truck
except me. I will get it weighed again after all the stuff is out.
Patrick O'Day
2000 Dakota 4x4, 4.7L, CC
Ztube w/9 inch big mouth filter
68 MM TB Ported and Polished
Rancho 9000 Shocks
Robert Shaw 755 180F Thermostat
Mobil 1
----- Original Message -----
From: "Jayson Woodruff" <woodrufj@uci.edu>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Saturday, February 17, 2001 10:39 PM
Subject: Re: DML: 4.7 HP measured with Gtech
> That's almost exactly what I got. But my truck weighed "only" 4200lbs.
>
> Jay W
>
> WOT or waiting at a Red wrote:
>
> > I just did my first series of runs with the Gtech in the Dak. We only
had a
> > short time to play this afternoon so the only measurement taken was
> > horsepower. I would appreciate if you could let me know if the numbers
look
> > reasonable given the mods the truck has on it. Also any recommendations
on
> > the next mod that would be appropriate would be welcome.
> >
> > I weighed the truck at a local scale, the weight was exactly 5400lbs.
The
> > results were as follows.
> >
> > Run 1 188
> > Run 2 196
> > Run 3 208
> > Run 4 206
> > Run 5 204
> > Run 6 206
> >
> > Average of runs 2 through 6 was 204hp.
> > I discarded the 188 as an error according to the instructions in the
manual.
> >
> > Patrick O'Day
> > 2000 Dakota 4x4, 4.7L, CC
> > Ztube w/9 inch big mouth filter
> > 68 MM TB Ported and Polished
> > Rancho 9000 Shocks
> > Robert Shaw 755 180F Thermostat
> > Mobil 1
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:19 EDT