Re: Fog lights on with high beams>e-group, Dakotaquadcabs

From: Leonard A Price (laprice@pathcom.com)
Date: Sun Feb 18 2001 - 14:21:17 EST


I read your instructions below but was unable to see any pic's.. Also I
looked at my truck and I had a relay that is marked "Fog Lamp Relay 1
USA/CAN" then I saw one marked " Fog Lamp Relay 2 CAN." any advise, guess
they make them different up here.
----- Original Message -----
From: <SEMIHEMI01@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Sunday, February 18, 2001 6:27 AM
Subject: DML: Fog lights on with high beams>e-group, Dakotaquadcabs

> Subject: Here it is, Fog light Re-Wire Procedure
>
>
> the responce was as i expected, alot of people want to do this........so i
> took some photos and here are the directions.
>
> it could not be any simpler, and the best part is NO cutting and it uses
the
> factory switches!!! also i can be changed back for state inspections for
> states like PA that dont allow this kind of thing!!
>
> download the picture and follow these instructions.
>
> step 1:
>
> Open your hood and remove the PDC (power distibution center) cover where
all
> your fuses and relays are located (its right behind the battery on the
4.7L
> V8). locate the Fog Light Relay using the chart on the inside of the
cover.
> the Fog Light Relay is the one i'm pointing to in Pic #1.
>
> Step 2:
>
> Remove the relay as shown in Pic #2, it simply pulls out. Note the 2
larger
> contact prongs on the relay parallel to eachother, these are the two
contacts
> circuts you need to complete with a piece of fusable link. wire will
work,
> however, I prefer fusable link because if you experience a short or power
> surge, the link will blow out like a fuse, preventing any serious
electrical
> burnouts.
>
> Step #3:
>
> here in Pic #3 you see the piece of fusable link i have prepaired with
thoes
> electrical contacts. you can find sizes in the hardware store that are a
> perfect match for the circut holes.
>
> Step #4:
>
> Complete the circut by plugging the fusable link into the 2 larger holes
that
> are parallel to eachother on the circut board as shown in Pic #4.
>
> Step #5:
>
> Replace the PDC cover as shown in Pic #5 and WHALLA!!! YOUR DONE! fire
> that puppy up and you have Fog lights on All the Time!!! as seen in Pic
#6
>
> let me know how it goes and if you are happy with this modification. I
spent
> several hours with my face in repair manual at the dealership where i work
> trying to figure out the wiring diagrams and developing this modifiction.
i
> love to hear some feedback!! :-)
>
> Craig P. Maxwell
> Assistant Service Manager (the youngest ever)
> Preston Dodge
>
> Disclaimer:
>
> I, Craig P. Maxwell, Preston Dodge or DaimlerChrysler are in no way
> responsible for any damage caused by this modification. Nor are we
> responsible for any fines or expenses related to this procedure, comlpete
at
> your own risk!!!
>
>
>
>
> SEMIHEMI01@AOL.COM (Bill C.) 2001 QC, 4.7L, 5spd. 3.55 LSD
> K-N + Cool-Air, Quick-D TB, 10w-30 MOBIL 1, 180 T'STAT, SilBlades
> GIBSON 3" Single Side-Swept cat-back, G-TECH, <A
> HREF="http://hometown.aol.com/semihemi01/">"THE DAK"</A>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:19 EDT