I thought I kind of listed the things that needed to be checked. You need
the ambient temperature sensor and the wiring harness. You probably will
need a new CTM. I don't know how the CCD and data bus talks to the CTM,
whether new modules are needed there. Somewhere along the way there is
information that is required from the PCM. The CTM may have a connection
already to get that info. All the diagnostics will require a DRB III
scanner. Watch your wiring! The wrong voltage going to the wrong place
will cost you a new PCM. Most voltage going into and coming out of the PCM
is ±5 volts.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of The Stewarts
Sent: Monday, February 19, 2001 7:09 AM
To: dakota-truck@buffnet.net
Subject: DML: Overhead Computer. ??
OK guys, I have the computer itself, plus my R/T was of course equipped with
the overhead console fromt he factory. NOw,a side from wiring of course,
what else will I need??
Thanks much and I need this info ASAP!
-Ryan
99 DA RC R/T
Gonna pay someone to do it. Hehehe
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:20 EDT