BINGO!!!
That's the one I was looking for.
For those of you with a little more electrical knowledge than what I posses.
Does this all sound straight? I'm curious what kinds of loads are placed on
the wiring harness when this mod is performed.
John
>FOG LAMPS ON WITH HIGH BEAMS
>This is a fairly simple, 5 minute procedure. First, you must remove the
>black plastic dash frame. It just snaps out. Then, remove the 3 screws
>holding the headlight switch in and remove the switch. There are 2
>connectors on the back of the switch.. A 2-wire connector and a multi-wire
>connector. The 2 wire connector has a BLACK and a BLACK with GREEN STRIPE
>wire. Run a jumper from the BLACK with GREEN STRIPE wire in the 2 wire
>connector to the LIGHT BLUE with BLACK stripe wire on the multi-wire
>connector. That's it! Your fog lights will come on when you turn them on
>(parking lamps must be on, at least) and will stay on with low or high
>beams.
>http://users.jnlk.com/dakrt/foglamps.htm
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:21 EDT