That would be part 7020. I am looking at it now to see what we need.
Bob Tucker
2000 CC 4.7L
3.92 ASD
http://www.twistedbits.net/WWWProfile/dakota/Fm2HnqebQme4g
-----Original Message-----
From: Ronald Wong [mailto:ron-wong@home.com]
Sent: Wednesday, February 21, 2001 10:25 AM
To: dakota-truck@buffnet.net
Subject: DML: RE: MSD Ignition for the 4.7
Now hold on there....I read on their site about an eight channel box for use
with coil over plugs. You better tell that techie to go back to class
before he answers questions for his company.....unless something has changed
in the last couple days.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Y2KDakuda@aol.com
Sent: Wednesday, February 21, 2001 8:06 AM
To: dakota-truck@buffnet.net
Subject: DML: MSD Ignition for the 4.7
I just got off the phone with a Tech at MSD and was talking to him about the
product that they have out for the distributorless ignition system (DIS).
There is only one problem. he said that it would work on the 4.7 but there
was a note in the file for the 4.7. He said that you need 2 boxes. You need
MSD DIS-2, PN 6211 $391.45 and MSD DIS-4, PN 6215 $427.56 plus you need 4
Tach adapters PN 8912 @ $58.99 each for a total cost of $1054.97 He also
said thast there were no plans to make it easier for the 4.7l.
Chris Lambert
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:22 EDT