Common Ron, have some coffee and wake up. :-)
I was attempting a little humor. Seems we all have been in the dumper since
the DE tragedy. Just wanted to make you smile. *-)
----- Original Message -----
From: "Ronald Wong" <ron-wong@home.com>
To: <dakota-truck@buffnet.net>
Sent: Thursday, February 22, 2001 8:22 AM
Subject: DML: RE: Plug wires
> Huh?! You can't cut plug wires and splice them. Most wires come a little
> longer than original stock but should be okay. In any case, MSD 8.5mm
super
> conductors is what I'd opt for.
>
> Ron
> 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile (URL follows)
> http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of WOT or waiting at a
> Red
> Sent: Wednesday, February 21, 2001 11:46 PM
> To: dakota-truck@buffnet.net
> Subject: DML: Plug wires
>
>
> Hey guys I need help with this.
>
> I just purchased new plug wires, Mopar from the dealer. I know I paid too
> much. When installing them, the first one fit fine. The second one was way
> way too long so I had to cut out a section and splice it back together
> again. Then I noticed the next wire was way way too short. I had to cut it
> and put the bit of wire from the other one in the middle. Well any way all
> but two of the wires in the set were the wrong length and needed to be
> modified. The dak run like crap now.
>
> Where can I get the correct wires if Mopar can't even make um? ;-)
>
> Patrick O'Day
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:23 EDT