Will
I plan on having a two line text display with 4 input buttons. The display
will allow you to toggle through the different sensor inputs and display
them real-time. The top line will be process variable (what's going on) and
the bottom line will be the offset or gain for the output.
Patrick O'Day
----- Original Message -----
From: <ABeerCan@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Thursday, March 01, 2001 10:34 AM
Subject: Re: DML: Modifing pulses and analog signals to the PCM
> In a message dated 3/1/01 12:11:08 PM Central Standard Time,
> dakatack@home.com writes:
>
> << I'm digging into the FSM and will start testing sensors on the Dak.
What do
> you think of the usefulness of real-time changes to the sensor outputs in
> the Cab?
>
> Patrick O'Day
> >>
>
> Patrick,
> Shogun makes something similar for the rice boys. I had one on my 96
> Integra GSR. It made a huge difference, but you had to play with it for a
> while (preferably on a dyno) to find the right settings. Are you planning
on
> having an led readout mounted in the cab? That is what Shogun uses and it
is
> alot easier to adjust this way. I looked at other options along the same
> line, but they used potentiometers (speeling?) that weren't as accurate to
> reset if you changed them for fuel mileage and then back to performance.
I
> believe Nopi lists them on their web page, not sure though. Just
something
> to look at to get more ideas from.
>
> Will
>
> "You better hope there is intelligent life out there somewhere,
> Cause I think we got cheated down here on Earth!"
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:53 EDT