Help me understand the problem. Cranking and turning over are the same
thing aren't they?
Cal
----- Original Message -----
From: Ray Sulich <ray.sulich@snet.net>
To: <dakota-truck@BUFFNET.NET>
Sent: Friday, March 02, 2001 6:21 PM
Subject: Re: DML: Somebody HELP!! Dak won't start
> At 02:57 PM 3/2/2001 -0800, you wrote:
> >Hi everyone,
> >
> > I just replaced my cap and rotor and now the truck won't start. It
> >cranks, but won't turn over. Everything is connected properly and I even
> >swapped the old and new components and it still won't start. What's
going
> >on?
>
> Do you have spark? Pull one of the plug hold it close to the block and
see
> if you have spark. If you do, you probably didn't put the plug wires back
> in the distributor cap correctly (wrong firing order). Also, may sure
your
> rotor is firmly on the shaft, and your distributor cap is fully on.
> Bye,
> Ray
>
> *********************************
> reply to ray.sulich@snet.net
> *********************************
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:54 EDT