ok if they can WHY even a cheap set of headers like
pasecetter or flow tech it going to flow better that
MANIFOLDS ...
--- Gmblows@aol.com wrote:
> Can these manifolds still be bought from the dealer.
> If so do you have the part #
> TIA
>
> > The manifolds are what I run on my crate 360
> (92-93 Magnums)
> > With a 625 Carter it put 235 to the road. I just
> put the new Edelbrock 800
> > AFB on it and it really woke up the motor. A lot
> more bottom end and mid
> > range. If I had to do it again on the truck I
> would put them on my
> > 97CC.Headers were to much of a pain to get them
> sealed up.The magnum
> > manifolds cost me 125.00 for the pair from the
> dealer. They work just as
> > good
> > as the 340 manifolds. They should work well on a
> truck. You just have to
> > block the ERG port on the manifolds.
> >
> > Brian in Seattle
=====
Frank G
http://members.onecenter.com/autoworld/dakota/index.html
Mopar or no truck
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:56 EDT