speed limiters sux.
arnold
----- Original Message -----
From: "Ronald Wong" <ron-wong@home.com>
To: <dakota-truck@buffnet.net>
Sent: Sunday, March 04, 2001 10:23 PM
Subject: DML: RE: Re: 4.7l of Dissapointment
> They're not all the same.
>
> Ron
> 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile (URL follows)
> http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Arnoldo Silva
> Sent: Sunday, March 04, 2001 8:20 PM
> To: dakota-truck@buffnet.net
> Subject: DML: Re: 4.7l of Dissapointment
>
>
> how did you get your truck to do 108 mine only does about 100 then the
speed
> limiter comes in.
> arnold
> ----- Original Message -----
> From: "Chris Lambert" <mopar88@efortress.com>
> To: <dakota-truck@buffnet.net>
> Sent: Sunday, March 04, 2001 9:14 PM
> Subject: DML: 4.7l of Dissapointment
>
>
> > OK guys I was a little disappointed with the 4.7 today. While racing a
> guy
> > in a neon R/T (I still beat him) I was on the highway in 4th going
> > uphill. It would not accelerate past 108mph. It was floored, just ran
> out
> > of steam. Well in 5th it started to accelerate again but still you
> > know... Any ideas? Although after this I needed to do a burnout, went
to
> > a favorite place of mine and continued to roast them up... Started in
> first
> > and got on the brake... nice... then decided to try and shift to
second...
> > well it went about 30' but then it started to really roast in second
with
> > me on the brake to hold it in one place... really, really rough pavement
> > too... but I am still disappointed... I am going to look into this a
> little
> > more later in the week once all this snow is off the roads... also after
I
> > clean my K&N...
> >
> > Chris
> >
> >
> >
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:56 EDT