Nope, has to go through people who build the PCM's or program them
specifically. In this case Mike Leach & Company. The flash will cost you
in the neighborhood of ~$500 unless you find an available HP PCM
specifically made for your vehicle for ~$300.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Arnoldo Silva
Sent: Tuesday, March 06, 2001 6:52 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: 4.7l of Dissapointment
can the factory easily remove the speed limiter and change stuff like add
more timing. just wondering because budy owns dealership and if they can
maybe ill ask him.
thanks arnold
----- Original Message -----
From: "Ronald Wong" <ron-wong@home.com>
To: <dakota-truck@buffnet.net>
Sent: Monday, March 05, 2001 11:02 AM
Subject: RE: DML: 4.7l of Dissapointment
> The speed limiter set at the factory is determined by the wheels and tires
> that came with your truck. They only set the limiter as high as the speed
> rating for your tires.
>
> Ron
> 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile (URL follows)
> http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of MALDBNSF@aol.com
> Sent: Monday, March 05, 2001 6:14 AM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: 4.7l of Dissapointment
>
>
>
> In a message dated 3/4/01 9:31:46 PM, mopar88@efortress.com writes:
>
> << It would not accelerate past 108mph. >>
>
> Hey what I'm doing worng? I can only get mine up to about 97!
>
> Don
> Y2K QC 4.7L Auto 3.55
> Geocities.com/maldbnsf
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:58 EDT