454CFM?? Are you sure those numbers are correct? Seems rather small for a
4.7L. (Considering that the 3.9L is at 500+CFM)
- Bernd
> -----Original Message-----
> From: WMBARRET@aol.com [mailto:WMBARRET@aol.com]
> Subject: DML: Hughes Engines 4.7L 68mm flow data is in......
>
> Ok folks, I talked to Hughes Engines this morning and Dave has flowed the
> 4.7L 68mm TB in stock form, and after his Stage I mod. and here are the
> DISSAPOINTING results.
>
> 65mm TB (Stock) 400 cfm
> 65mm TB (Stage I) 450 cfm
>
> 68mm TB (Stock) 420 cfm (5% increase over stock 65mm)
> 68mm TB (Stage I) 454 cfm (1% increase over Stage I 65mm)
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:58 EDT