I'll talk to him and let you know. Last time I talked to him he was still
wrestling with the 4.7 setup.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Jeff Durling
Sent: Sunday, March 11, 2001 7:39 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: 4.7 Borla Headers; Big Disappointment
Ransom T Holbrook wrote:
> I'm under the same belief and having the same problems with modifing the
> y-pipe. I've done more than my share with modifying street cars and the
4.L
> DAK has the worse looking Y-pipe set up I've seen, well may be second to
the
> SHO. A good 2 1/2" mandrel bent y-pipe with hi-flow cats should net a lot
> of HP. Glad to hear that the stock casting is smooth, this means I need
to
> only concentrate on the exhaust and not the headers, but like Matt says ",
> nobody will touch the Y-pipe"
I wonder if Mike Leach has looked into it or knows that if there were a part
out
there.......there would be some buyers.
Jeff Durling
'01 QC 4x2 SLT+
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:06 EDT