That's what you should use. They say ceramic pads are quieter and not as
much brake dust, but I think semi-metallic's stop faster.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of William H. Hiatt III
Sent: Monday, March 12, 2001 9:14 AM
To: dakota-truck@buffnet.net
Subject: DML: Re: RE: Powerslot rotors/pads?
Can't I just use the Raybestos SSD820 (Semi-Metallic pads I guess). What's
the benefit of using ceramic pads.
william
----- Original Message -----
From: Sam Parthemer <srp@home.com>
To: <dakota-truck@buffnet.net>
Sent: Monday, March 12, 2001 9:14 AM
Subject: DML: RE: Powerslot rotors/pads?
> Good luck... no ceramic pads so far for 2000 trucks... the brake pads on
> 2000 are different than for the 1999 models.
>
> I run oem pads for now.
>
> Sam '00 RT
>
>
> > -----Original Message-----
> > From: owner-dakota-truck@buffnet.net
> > [mailto:owner-dakota-truck@buffnet.net]On Behalf Of William H. Hiatt III
> > Sent: Monday, March 12, 2001 8:07 AM
> > To: dakota-truck@buffnet.net
> > Subject: DML: Powerslot rotors/pads?
> >
> >
> > I'm interested in getting the powerslot rotors. What are the best pads
to
> > use for these rotors? I got a 2000 CC 4.7
> >
> > Thanks
> > William
> >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:07 EDT