RE: RE: Homade grill insert question

From: yllwdkta (yllwdkta@insight.rr.com)
Date: Sun Mar 18 2001 - 03:05:17 EST


I actually was trying to find some metal for my spring clamps. I need 3/8"
thick and 1" wide. No one caries this large of steel. If you have any
ideas. I cam upon the rain gutters and dreamped this crazy idea. No I
didn't take a look at the hardware clothe, or expanded sheets. I will have
to take a look to see what they look like. I went to the one on the east
side of Columbus (Brice road)...Come on you know what Brice rd is right? If
not then you are not a true Mopar fan. (ask and I will fill you in if not).

Tim Althoff
http://www.angelfire.com/oh3/yllw/dkta.html
<http://www.angelfire.com/oh3/yllw/dkta.html>
99 Solar Yellow RC V-6 Manual
<http://www.angelfire.com/oh3/yllw/dkta.html>

-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of AlexReed
Sent: Saturday, March 17, 2001 2:25 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: Homade grill insert question

Did you take a look at the hardware clothe, or the expanded sheets? I think
the expanded sheets would work, they are durable and tough, plus they can be
bent pretty easily. When I get the extra time and the money I will give this
a
shot. In the Lowe's I work at the expanded sheets are in Hardware off isle
14
with the ironworks set. Hehe, had to mention that! Good choice going to
Lowe's, which one did you go to by the way? Just curious. Later.

AR

> that is so funny I was just a Lowe's to find the same thing. What I found
> was a rain gutter cover. I haven't done anything with it so that would be
> up to you. Good luck. Let me know how things go. I may work on that
> today.
>
> Tim Althoff
> http://www.angelfire.com/oh3/yllw/dkta.html
> <http://www.angelfire.com/oh3/yllw/dkta.html>
> 99 Solar Yellow RC V-6 Manual
> <http://www.angelfire.com/oh3/yllw/dkta.html>
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Puddlestompa@aol.com
> Sent: Saturday, March 17, 2001 12:18 PM
> To: dakota-truck@buffnet.net
> Subject: DML: Homade grill insert question
>
> I am looking at making my own grill insert and want to use some kind of
> metal
> mesh, honeycomb or just holes all throught the metal. I looked at
> HomeDepository but could not find anything. Anybody have any suggestions,
> even if you have seen store bought ones like this that would help, thanks.
>
> Aaron "The Man"
> 98 2WD 2.5L 4cyl RC
> http://www.hometown.aol.com/puddlestompa/mydak.html



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:15 EDT