Hmmm...is that the same "Zing" you threw at me yesterday?! ;-)
Anyway, Paul, people usually put in a fresh set of plugs, cap, and rotor,
and perhaps a new set of wires. Those things will definitely help the
"zing".
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Bernd D. Ratsch
Sent: Saturday, March 24, 2001 1:06 PM
To: dakota-truck@buffnet.net
Subject: DML: RE: Installed the MSD
Give it a little bit, but the "zing" should be there...a little bit. Try to
notice the idle quality, acceleration (smoother or not?) and MPG in the long
term.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Paul Bumann
Sent: Friday, March 23, 2001 2:53 PM
To: DML
Subject: DML: Installed the MSD
Well i put the MSD in , wired the factory coil into it.
Ok, now where is the ziiing at? It ran pretty much like normal, no Check
engine light or anything yet. Too early to tell yet?
Any other MSD stories or advice?
I put in the 6A box.
Paul
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:25 EDT