The wiring harness is basically a couple of connectors zip-tied together.
You can do the same thing yourself and save some $$. Just get some
connectors at AutoZone or wherever and wire them in so you can bypass the
MSD units if you want.
- Alex
> From: Paul Bumann <Ramsport96@home.com>
> Reply-To: dakota-truck@buffnet.net
> Date: Fri, 23 Mar 2001 15:35:50 -0600
> To: dakota-truck@buffnet.net
> Subject: DML: Re: Re: Installed the MSD
>
> I'll order that , thanks kyle..:o)
> ----- Original Message -----
> From: "Kyle Kozubal" <grndak4x4@home.com>
> To: <dakota-truck@buffnet.net>
> Sent: Saturday, March 24, 2001 3:10 PM
> Subject: DML: Re: Installed the MSD
>
>
>>> Well i put the MSD in , wired the factory coil into it.
>>>
>>> Ok, now where is the ziiing at? It ran pretty much like normal, no Check
>>> engine light or anything yet. Too early to tell yet?
>>> Any other MSD stories or advice?
>>> I put in the 6A box.
>>
>> Hope you installed it with the 8873 Universal Wiring Harness. This way,
> when
>> it dies on you, you can just unplug it and plug back in the stock ignition
>> system and you wont be left stranded. Hope it works better for you than it
>> did me for.
>> Kyle
>> 93 Dakota 4x4 V6
>>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:25 EDT