McGard makes a good tailgate lock. It connects to the hinge portion, not
the handle. therefor no key is required, the gate can easily be opened and
closed but cannot be removed from the bed frame without a special type 'key'
to actually remove the unit, kinda like a wheel lock for your tires.
> ----- Original Message -----
> From: "Aurelio Lopez" <alopez74@cfl.rr.com>
> To: <dakota-truck-moderator@bent.twistedbits.net>
> Sent: Saturday, March 24, 2001 4:07 PM
> Subject: DML: Tail Gate Lock
>
>
> > BlankHi all. Two nights ago my neighbors tail gate was stolen out of his
> > truck. I can't believe that happened. It must've taken 10 to 15 minutes
> > (at best) to un-bolt the gate, load it up and drive away!! Those jerks
> > are getting bold these days!!
> >
> > I took my queue right then and went to Poop Boys and got a tail gate
> > lock made by Bully. It won't work as advertised!! I mounted it but if I
> > forcibly pull on the lever the gate will still open! Anyone have any
> > suggestions, perhaps another manufacturer?
> >
> > TIA... Aurelio
> >
> >
> > --
> > DML Profile:
> > http://www.twistedbits.net/WWWProfile/dakota/UwHhKURBBnMA6
> >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:27 EDT