Re: Re: Re: Tail Gate Lock

From: Aurelio Lopez (alopez74@cfl.rr.com)
Date: Mon Mar 26 2001 - 18:18:52 EST


I went to their site, good looking product. I ordered a pop-in lock this morning though, but thanks for the info.

Aurelio

""Greg"" <skipjack@radix.net> wrote in message news:006301c0b5aa$9d885800$2d90c0cf@e0y3q2...
> McGard makes a good tailgate lock. It connects to the hinge portion, not
> the handle. therefor no key is required, the gate can easily be opened and
> closed but cannot be removed from the bed frame without a special type 'key'
> to actually remove the unit, kinda like a wheel lock for your tires.
>
>
> > ----- Original Message -----
> > From: "Aurelio Lopez" <alopez74@cfl.rr.com>
> > To: <dakota-truck-moderator@bent.twistedbits.net>
> > Sent: Saturday, March 24, 2001 4:07 PM
> > Subject: DML: Tail Gate Lock
> >
> >
> > > BlankHi all. Two nights ago my neighbors tail gate was stolen out of his
> > > truck. I can't believe that happened. It must've taken 10 to 15 minutes
> > > (at best) to un-bolt the gate, load it up and drive away!! Those jerks
> > > are getting bold these days!!
> > >
> > > I took my queue right then and went to Poop Boys and got a tail gate
> > > lock made by Bully. It won't work as advertised!! I mounted it but if I
> > > forcibly pull on the lever the gate will still open! Anyone have any
> > > suggestions, perhaps another manufacturer?
> > >
> > > TIA... Aurelio
> > >
> > >
> > > --
> > > DML Profile:
> > > http://www.twistedbits.net/WWWProfile/dakota/UwHhKURBBnMA6
> > >
> > >
> >
> >
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:29 EDT