RE: RE: Break in Period and synthetics

From: Ronald Wong (ron-wong@home.com)
Date: Fri Mar 30 2001 - 11:49:33 EST


It's all the same. If you let it sit a while which I do anyway. I hate hot
oil. With everything cooled down, basically all your gonna get with the
filter is what you would have got had you changed everything. At least
that's the assumption. I haven't gotten to that point yet either so we'll
see.

Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY

-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Sevrence, Sean
(S.J.)
Sent: Friday, March 30, 2001 7:35 AM
To: 'dakota-truck@buffnet.net'
Subject: DML: RE: Break in Period and synthetics

Hey Ron!

Just had a question about your response. I have never tried to change just
the filter without draining the oil first. I would think that when you
remove the filter, any oil in the crankcase above the filter would drain,
plus the oil in the filter. Granted the majority of the oil is in the pan,
so we are only talking about 1+ qts. Is this an accurate description? If so,
I need to do this tomorrow.

Sounds like a great testing plan for your syn oil! Can't wait to read the
results!

Have a great weekend!
Sean
'92 RC Sport 3.9L 5spd - 250,000mi!
'01 CC SLT+ 4.7L 5spd 3.92 LSD Mobil-1!

-----Original Message-----
From: Ronald Wong [mailto:ron-wong@home.com]
Sent: Thursday, March 29, 2001 4:05 PM
To: dakota-truck@buffnet.net
Subject: DML: RE: Breakin Period and synthetics

That all depends on one of my replies on that other board. Some
manufacturers use synthetics right off the bat. The question is: How long
have they run the engines before you actually get your truck? It's all
about the seating of the rings, etc. Some have done it at the first change
and some have done it at 100K miles. Some have had problems and some
haven't. I know this doesn't tell you what you want to hear but the choice
is yours. I've had synthetics in mine since 5K miles. After the first
1,000, I drove it hard occasionally to try and get everything seated (and to
have fun). At 5,000 I changed all the dino stuff out and put the Syntec in.

I'm now at 12K miles. I've changed twice since the 5K along with a new
filter each time. This change has already occurred. What I plan on doing
is changing the filter every 3K-3.5K miles and putting in a new qt each
time. I am going to hold off changing the oil until around 21K-22K miles.
At about 16K miles, I will send a sample to Blackstone Labs for analysis and
then again when I change out at 21K. Hopefully, I'll be able to see how
well this stuff holds up through a long change like that.

Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY

-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Stephen Reill
Sent: Thursday, March 29, 2001 11:33 AM
To: dak list
Subject: DML: Breakin Period and synthetics

A good question was brought up on the message boards and the replies have
gotten me a little worried.

I have recently changed over to Mobil 1 synthtic iol..(with Mobil 1 filter)
 My truck has 800 miles on it. I am hearing that I sould have waited for
the truck to break in more. Should I drain and change back to regular oil
for a while or just leave it in?



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:36 EDT