You start to have a wear pattern on the rollers and cam. If you replace the
cam, the wear pattern is still on the rollers which will prematurely wear
out the lobes on the new cam.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Jon Smith
Sent: Sunday, April 01, 2001 2:03 PM
To: dakota-truck@buffnet.net
Subject: DML: RE: RE: Re: RE: 3.9l cam plus lifters+pushrods
why fer? sure they'll wear out over time, everything does... but if
they're ok, why not reuse them?
______________________
Jon Smith--Raleigh, NC
www.fast4x4.net
jon@fast4x4.net
344hp/424tq
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
-That's scary.
-
-- Bernd
-
-
-I was told the Roller Lifters were fine to use over again, as they
-dont wear
-out... (Pretty much what Marty told me)
-
-Tim Berry
-
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:55 EDT