You have to bench test it. You could use a car battery to see if it
receives power. A continuity tester won't work, well it will but it takes
alot of work. Simulate a hook-up by hooking up the power wire and the
negative wire, then touch the trigger wire to the positive side. If it
shows you have power, then hook a radio and speaker to see what happens.
One speaker will work to test all channels just hook it up to each channel
one at a time.
Chris
www.cruznlo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:58 EDT