Thanks..the reason I asking is because I had this amp in an old truck and
when I took out the subs, the speaker wires were left hanging and I think the
pos and neg were left toching...will this result in a blown amp??? Thanks
again
Im gonna try the bench test...
Chris and/or Kathy Carton wrote:
> You have to bench test it. You could use a car battery to see if it
> receives power. A continuity tester won't work, well it will but it takes
> alot of work. Simulate a hook-up by hooking up the power wire and the
> negative wire, then touch the trigger wire to the positive side. If it
> shows you have power, then hook a radio and speaker to see what happens.
> One speaker will work to test all channels just hook it up to each channel
> one at a time.
>
> Chris
>
> www.cruznlo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:58 EDT