Well, good news / bad news kinda thing here. I started modifying my used throttle body last night. In the process of disassembling the darn thing though I ruined the torx head screws that hold the throttle plates in the shaft. Well, I hate torx head screws anyway, so I went throught the shop looking for some replacements. The best thing I found is some phillips button head screws. They're stainless, I wouldn't think this would be a problem, but I figured I'd ask the opinion of the people that have done this stuff before. I know I've heard stainless on the air cleaner hold down is a no-no, anyone know if I can get by alright using those to hold the throttle plates in place?
On the lighter side, I got as far as milling the air horns off....prolley gonna start the dremel and polishing work tomorrow night. Woohoo!!!
==
-Batman
'99 CC 4x4 5.2L 5spd sprt wht
10" X 2.75" K&N Open Element
Turbo II muffler
_____________________________________________________________
FREE 6MB ZombieWeb E-Mail Account At http://www.zombieweb.com
Report spam to spam@zombieweb.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:06 EDT