You need to go to a dealer that deals in 97 and up trucks, or was that 98
and up?! Anyways, they're way behind the times. I hope you're not letting
them change your gears out.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Noah Boehm
Sent: Thursday, April 19, 2001 7:55 PM
To: dakota-truck@BUFFNET.NET
Subject: RE: DML: Gears
hmmm, thats weird...Hard to understand..I called the dealership, and they
told me that there are 3 different speedo gears for trucks with a 3.92 rear
ratio. a 35 tooth, 36 and 38. The different gears depend on which tire
size you have. Mine has 255.65.15's on it...I am going to keep the same
tires I have now, since they are new and have no need to be changed. How
does the speed sensor measure the amount of times the diff turns without
knowing what the variables are. If I put a 3.92 instead of a 3.55, I
figured it would turn quite a bit faster than stock...I am asking because I
don't really know too much about this truck yet as far as modifying stuff
like this...When I made the change on my Mustang, I went from a 3.08 to a
3.73, changed to speedo gear on the side of the trans and its all good...
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Andy Levy
Sent: Thursday, April 19, 2001 10:42 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: Gears
There is NO speedo gear that needs to be changed and no recalibration of
anything required. Your speed sensor is on the rear axle, and the only
change to your truck that will result in a required recalibration is a
change intire size.
Noah Boehm wrote:
>
> Hi, I am new to the list and am trying to find out some information on
> changing gears. I have a 2000 Dakota that I am going to install a 3.92
gear
> in, instead of the 3.55 for a little more acceleration. I want to know if
> anyone has done this, and what speedo gear they used to compensate for it.
> My truck has the 255.65.15 tires on it, 2wd, V6...Nothing special...Let me
> know if possible where to find out about this...How do I compensate for
the
> gear difference at my odometer, I figured that I will have to also change
> the speedo drive gear, anyone know where it is located???
>
> Thanks
>
> Noah Boehm
> theark1@mediaone.net
> 89 5.slo
> 00 Dakota
> http://people.mw.mediaone.net/theark1/index.html
-- -andy http://home.twcny.rr.com/andylevy/ --- andylevy@bigfoot.com ---------------------------------------------------------------- Remember, amateurs built the ark. Professionals built the Titanic. ----------------------------------------------------------------
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:06 EDT