Should get the "Made 4 You" looms.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Hoegen
Sent: Monday, April 30, 2001 7:03 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Re: Accel plug wires
To be honest, I gave the stock wire looms a shot, but had difficulty fitting
them (had a heck of a time trying to close the stock looms..they kept poppin
open), so I decided to get some from JCW. Seems others may have had better
luck.
""jay & dana"" <jay&dana@telus.net> wrote in message
news:041101c0d1c0$0a9d9780$325535d1@a4a91192...
> To those of you that are using these wires, how do you find the fit at the
> plug and the distributor cap?
> Being 8mm would I be correct in assuming that they are too big to fit the
> stock wire looms on the valve covers? If so, does someone make larger
looms
> that would fit in the same location as the stock Mopar ones?
>
> TIA
> Jay
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:16 EDT