Kevin,
Yes, plenty of room with the baffles removed, or you can dimple the baffles
a bit for the clearance you need.
Rich - Ashburn, VA
-----Original Message-----
From: Jon Smith [mailto:jon@fast4x4.net]
Sent: Tuesday, May 08, 2001 6:33 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: Valve covers
Should be able to, but I'm not 100% certain
On 2001.05.08 18:21 Kevin wrote:
> Jon, I think I may have asked you this before, please excuse me if I
> have.Can you use the stock valve covers with 1.7 ratio roller rockers if
> the
> baffles are removed?
_______________
Jon Smith
Raleigh, NC
www.fast4x4.net
'94 CC 4x4 318
344rwhp/424rwtq
~~~~~~~~~~~~~~~
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:27 EDT