You can get one tuned for whatever SC, from Marty at KRC Performance.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Shawn Bowen
Sent: Thursday, May 10, 2001 10:34 AM
To: dakota-truck@BUFFNET.NET
Subject: DML: Powerdyne/MP HP PCM
I just got off the phone with Powerdyne Tech support and they said not to
use the Mopar HP PCM with their SC... The guy said it could cause
detonation, bla, bla. I mentioned a cooler T-Stat and running cooler plugs
and he said that would help.
Anyone had detonation problems with a Powerdyne or any other SC??? Any
suggestions to prevent this if it's true? I really wanted the Mopar PCM to
get the redline higher and many other reasons, this guy spooked me a little.
He also had a valid point about Powerdyne vs Kenne Bell, while KB does boost
at a lower range at cruising speed on the highway it burns a truckload of
gas because it's constantly boosting. What he didn't really want to talk
about was the PCM;-) KB offer's one tuned for their product, Powerdyne
doesn't. Decisions, decisions... The Powerdyne rep recommended this shop
>>> www.worldwideperformanceparts.com, the site is a little hard to navigate
but he has a pretty good price on the PD SC's.
Thanks,
Shawn
98 5.2L 4x4 CC Dak
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:27 EDT