That depends on whether you're talking from the bottom or the top. In
either case, it's clockwise to loosen.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Shawn Bowen
Sent: Sunday, May 13, 2001 9:21 AM
To: dakota-truck@buffnet.net
Subject: RE: DML: Re: Fan removal?
If the bolt is reverse-threaded wouldn't that mean turn it right to left???
Shawn
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Paul Bumann
Sent: Sunday, May 13, 2001 10:25 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Re: Fan removal?
snap on has a tool for the fan too..
it's like 13 dollars..i believe
it attaches to a 1/2" drive. I can get the info for yall later..
Paul
----- Original Message -----
From: <MALDBNSF@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Sunday, May 13, 2001 7:52 AM
Subject: Re: DML: Re: Fan removal?
> Thanks, I'll try later today
>
> >I went to my local dodge dealer today and asked him what they used to
take
> >
> >the fan clutch off when they work on them, and he told me to get a 1
7/16ths
> >
> >combination wrench and stick it on the nut and give it a sharp wack with
> >a
> >good sized rubber mallet, realizing of course that the threads are
backwards
> >
> >so you tap from right to left.
> >I tried it today when i got home and it worked really easy, got the fan
> >all
> >installed and it works great. Jon
>
>
> Don M
>
> Geocities.com/maldbnsf
>
>
> '00 QC Bronze, 4.7L, Rest listed at
> http://www.twistedbits.net/WWWProfile/dakota/QwkvWz@DAJFf6/profile.htm
>
>
> P.S. Did I mention I love my DAK!!!!!!!!!
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:28 EDT