If the bolt is reverse-threaded wouldn't that mean turn it right to left???
Shawn
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Paul Bumann
Sent: Sunday, May 13, 2001 10:25 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Re: Fan removal?
snap on has a tool for the fan too..
it's like 13 dollars..i believe
it attaches to a 1/2" drive. I can get the info for yall later..
Paul
----- Original Message -----
From: <MALDBNSF@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Sunday, May 13, 2001 7:52 AM
Subject: Re: DML: Re: Fan removal?
> Thanks, I'll try later today
>
> >I went to my local dodge dealer today and asked him what they used to
take
> >
> >the fan clutch off when they work on them, and he told me to get a 1
7/16ths
> >
> >combination wrench and stick it on the nut and give it a sharp wack with
> >a
> >good sized rubber mallet, realizing of course that the threads are
backwards
> >
> >so you tap from right to left.
> >I tried it today when i got home and it worked really easy, got the fan
> >all
> >installed and it works great. Jon
>
>
> Don M
>
> Geocities.com/maldbnsf
>
>
> '00 QC Bronze, 4.7L, Rest listed at
> http://www.twistedbits.net/WWWProfile/dakota/QwkvWz@DAJFf6/profile.htm
>
>
> P.S. Did I mention I love my DAK!!!!!!!!!
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:28 EDT