Shawn,
An underdrive pulley will slow thr SC'er rpm down resulting in lower
pressure. If you cut the size of the crank pulley by 15 percent then you have
to do the same for the blower pulley to maintain the same ratio and get the
same pressure. Bill
SEMIHEMI01@AOL.COM (Bill C.) 2001 QC, 4.7L, KENNE BELL SC'ed, 5spd.
3.55 LSD, Bored & polished TB, 10w-30 MOBIL 1, GIBSON 3" Single <A
HREF="http://hometown.aol.com/semihemi01/">"THE DAK"</A>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:31 EDT