So can thin rotors.
--------------------------------------
Steven St.Laurent
System Engineer (IOW/IOS-NT)
PSD, MCTSSA
MARCORSYSCOM, USMC
(Work) 760-725-2506 (DSN: 365)
(Work) mailto:stlaurents@mctssa.usmc.mil
(Home) mailto:saint1958@home.com
"In fact, my work has already proven
itself to be correct. People such
as you just haven't gotten it yet.
(unknown author)
-----Original Message-----
From: Andy Levy [mailto:andylevy@bigfoot.com]
Sent: Friday, May 25, 2001 8:26 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: Avoiding Rotor Warp
Sounds about right to me. Nailing the brakes then hitting a big puddle is
also
a recipie for disaster.
Overtorquing the wheels can also cause warping.
Poor materials can also cause warping.
WOT or waiting at a Red wrote:
> Before you read this and flame me for being an idiot, I want you to
remember
> that this information from someone else and I am passing it along just in
> case there is something worth wile to consider here.
>
> According to my Mechanical Engineer friend, who studied this problem in
> industrial rotor based breaking systems, the warp can often be avoided.
>
> After hard breaking the whole rotor is hot and while the break holds the
> rotor, the surface under the break pad cools much slower then the rest of
> the rotor. This is one major reason rotors warp.
>
> If after you stop, you put the gears in neutral and release the stopping
> pads, problem gone.
>
> He also suggested not washing the truck for 20 min or so after getting
home.
> The water spray hits the rotor everywhere but under the pad and cools
those
> surfaces faster, warpage again.
>
> I asked about car washes and he said, the wheel is rolling and the whole
> rotor get wet and cools evenly.
>
> I don't know if this is good info or not. It sounds plausible to me. I'm
> going to try to follow his suggestions next set of rotors, soon I hope as
> the OEM ones are CRAP!
>
> This mail list has gotten really nasty lately and I hesitate to post here
> any more. Do as you will with this info, keep your flames to yourself.
>
> Patrick O'Day
> 2000 Dakota 4x4, 4.7L, CC
> Profile at www.dakota-truck.net/profiles/dakota/Cy9WFjn1QtCYw/profile.htm
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:34 EDT