Ronald.....the 330-180 is much wider at the base (the part that sits inside
the crankcase side). The stock T-Stat had a much smaller cone shaped spring
side??????
Has anyone actually put a 330-180 in a GenIII dak (99).? The base of it
seems to be as wide as the opening for the T-Stat to sit in, I cant get it
to seat in the opening??
""Ronald Wong"" <ron-wong@home.com> wrote in message
news:NDBBIHDGKKJOIJDEOCBMCEJEEIAA.ron-wong@home.com...
> The 330-180 should work. The only other one is a 755-180. Don't forget
to
> use a gasket.
>
> Ron
> 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile (URL follows)
> http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> [mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of (MAGNUM S/T)
> Sent: Friday, June 01, 2001 4:39 PM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: DML: Re: T-Stat for V6 99 Dakota!!!
>
>
> Can anyone help?? My truck is just sittin there until I find out the
> Autolite part nuimber......its a sad, sad day in S/T ville :-(
> ""(MAGNUM S/T)"" <hoegen@kersur.net> wrote in message
> news:9f92b0$8hu$1@bent.twistedbits.net...
> > I took it all apart...and the T-stat I got dont fit :-( I got the Robert
> > Shaw 330-180)...............I'm guessing this is NOT the right one.
> >
> > If anyone can tell me the correct one for a 99 V6 Dak I'd appreciate it
!!
> >
> > Thanks
> >
> >
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:43 EDT