Autozone for the stats and Wal-Mart for the 3923's.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Paul Macey
Sent: Saturday, June 02, 2001 7:53 AM
To: dakota-truck@buffnet.net
Subject: RE: DML: RE: Next mod help
Ron is right, no 180 degree thermostats in stock but if I choose to bring
one in at next service, they'll install it. Had my first service today at
807 miles to take out the 5w-30 oil and put in 10w-30 'bottled' oil.
(also thought I had a problem with the QCs front doors not catching the
first indent, they tried out QCs and said they felt the same...will have
to watch this...no biggie)
BTW, 2 local autostores and Wal-mart don't carry Rober Shaw TS, only Stant
which I believe I should stay away from, right?
Also no luck on finding Autolite 3923 Copper plugs, just the 5224s...what
auto chain store in the NY area carries these, or where on the WEB could I
get both the 3923s and 755-180 TS?
Thanks!
On Fri, 1 Jun 2001, Ronald Wong wrote:
> NO
>
> Ron
> 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile (URL follows)
> http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> [mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Paul Macey
> Sent: Friday, June 01, 2001 6:57 AM
> To: dakota-truck@BUFFNET.NET
> Subject: Re: DML: RE: Next mod help
>
>
>
> Does Chrysler/Mopar stock a 180 degree thermostat for the 4.7, and if so,
> is it as good as the Robert Shaw thermostats?
>
> I've got my first oil change coming up (have about 805 miles on the truck)
> and was wondering if I should just get them to do the install, no fuss/no
> mess on my part...wondering if they'd give me a hard time about taking a
> factory spec'd part out though?
>
> Thanks.
>
> On Fri, 1 Jun 2001, Tom Lorek wrote:
>
> > Oops, I forgot to list the Robert Shaw 180 thermostat.
> >
> > Sorry!
> >
> > Tom
> >
> > On Fri, 01 Jun 2001 01:09:40 -0400, bernd@texas.net ("Bernd D.
> > Ratsch") wrote:
> >
> > >Headers would be the next step. However, you can also install a 180
> > >Degree T'Stat which will help keep things slightly cooler as well
(makes
> > >a little bit more power also).
> > >
> > >- Bernd
> > >
> > >-----Original Message-----
> > >From: owner-dakota-truck@BUFFNET.NET
> > >[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Tom Lorek
> > >Sent: Thursday, May 31, 2001 9:30 PM
> > >To: dakota-truck-moderator@bent.twistedbits.net
> > >Subject: DML: Next mod help
> > >
> > >
> > >Here's a list of mods I have on my 5.9 Durango...
> > >
> > >Quick D Air Intake
> > >Bernd's IAT Adjuster
> > >Stainless Ultraflow Muffler cut in
> > >MSD Plug wires
> > >Accel Cap & Rotor
> > >
> > >I will be getting in on the speedtweaks Fastman TB group by later this
> > >month, so....
> > >
> > >What next???
> > >
> > >MSD Box???
> > >PCM???
> > >Headers???
> > >
> > >I didn't go the underdrive pulley route because it turns out my truck
> > >has a one piece balancer/pulley and ASP wants $180+ for one. Not cost
> > >effective in my book.
> > >
> > >Thanks,
> > >
> > >Tom Lorek
> > >Carmel, IN
> > >tlorek@yahoo.com
> > >'00 PB-Camel 5.9 SLT+ FT4WD 3.92 LSD
> > >Tom Lorek
> > >tlorek@yahoo.com
> > >Carmel, IN
> > >'00 PB 5.9 SLT+ Durango
> > >'99 Concorde LXi
> > >'87 GN 10.52 @ 127.5
> > >
> >
> > Tom Lorek
> > tlorek@yahoo.com
> > Carmel, IN
> > '00 PB 5.9 SLT+ Durango
> > '99 Concorde LXi
> > '87 GN 10.52 @ 127.5
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:44 EDT