The general consensus is: Either they don't make one for your yr/model or it
doesn't work, or it makes it worse. At least with a Jet chip, it just
doesn't do anything, rather than make things worse. Your best bet? If
there is a Mopar performance PCM for your vehicle, get that, or you can call
Mike Leach & Co. at (714) 639-5220 to see if your PCM is eligible for custom
programming (it won't be cheap!).
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Hugh
Sent: Sunday, June 10, 2001 5:55 AM
To: dakota-truck@buffnet.net
Subject: DML: Hypertech PTM Opinion
Second Request!
Surely some of you have a technical opinion that you can pass along.
I have heard many DMLers opine that the Jet Chip 2 doesn't make any
significant HP with the 5.2 and 5.9 L engines.
Well, what is the collected wisdom of DML regarding the Hypertech Module?
Haven't heard much about it and thought about looking into it, but would
like a position when I start. Thanks,
Hugh
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:46 EDT