Shawn,
Don't forget to install the bypass valve with the 9#+ system. It will
heat up the S/C if you're not running a bypass valve and will cause
premature failure to the S/C.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of Shawn Bowen
Subject: DML: RE: Re: Trucks running GOOD
Same pulley. I have a boost gauge now that's not permanently mounted,
though it works (at least seems to). I was getting just a tad over 6
with the stock pulley, and then I swapped pulley's and now it's a hair
over 10. I think the heads cam probably have something to do with it,
there are several other mods that will lower the apparent "Boost",
however you are still pumping that air through the system, just much
more efficiently. From what I understand the M1 Intake and Ported
polished heads (esp big valve
types) will drop the apparent boost in your truck because they flow so
much better, I wouldn't sweat it cause it sounds like a good thing.
Shawn
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:51 EDT