Just curious as to why it's important to get the torque right when
installing these drain or filler plugs. I always thought that you just
tighten them so they won't leak (on my previous vehicles anyway). What
should the torque be on the transfer case and the 5 speed if it is that
important?
Thanks again
Jay
-----Original Message-----
From: Aajaynefour@cs.com <Aajaynefour@cs.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Wednesday, June 27, 2001 9:56 AM
Subject: Re: DML: transfer case ?
>Matt,
>
>On the 2000's with the 231 transfer case a 10mm hex is required. I am
>assuming you have the same transfer case. Make sure you get the torque
right
>as well. Good luck.
>
>Andrew
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:54 EDT