I don't believe the LA Roller Lifters will work in a Magnum. Lifter bore
angle and/or lifter bore are different if I recall correctly.
TonyC
-----Original Message-----
From: chris@slowcar.net <chris@slowcar.net>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Wednesday, June 27, 2001 8:35 PM
Subject: Re: DML: Solid roller setup
>
> Yep, though not for long :) Sorry if I wasn't clear - I want to
>*convert* it to a solid roller setup, and I have found solid roller
>lifters for a LA engine and am assuming that they will work in
>a magnum engine. Was also wondering if anyone else has undertaken
>this conversion.
>
> Chris Bennight
>
>----- Original Message -----
>From: "Jon Smith" <jon@fast4x4.net>
>To: <dakota-truck@buffnet.net>
>Sent: Wednesday, June 27, 2001 6:42 PM
>Subject: Re: DML: Solid roller setup
>
>
>| LA motors were hyd. roller, Magnum motors are a hyd. roller lifter
>|
>|
>| > Just curious if anyone has done a solid roller
>| > setup yet on a magnum motor - or knows someone
>| > who has. It looks like it should be fine as long as
>| > I put a restrictor in, but I don't have any experience
>| > with Mopar motors (all Chevy :) ). Also I am assuming
>| > lifters are the same as the normal LA engine series?
>| >
>| >
>| > Chris Bennight
>| >
>| >
>| >
>| --
>| _______________
>| Jon Smith
>| Raleigh, NC
>| www.fast4x4.net
>| '94 CC 4x4 318
>| 344rwhp/424rwtq
>| ~~~~~~~~~~~~~~~
>|
>|
>|
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:54 EDT