Tokico's
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of David D.
Sent: Sunday, July 08, 2001 6:08 PM
To: dakota-truck@buffnet.net
Subject: DML: shocks..
Hey Ron...what shocks do you have on your QC?
Digger
>From: "Ronald Wong" <ron-wong@home.com>
>Reply-To: dakota-truck@buffnet.net
>To: <dakota-truck@buffnet.net>
>Subject: DML: RE: stumbling problem. new discovery..... MSD ???
>ignition?
>Date: Sun, 8 Jul 2001 17:34:38 -0700
>
>Hey Chuong,
>
>Let's go back to basics. Bypass the MSD-6. Put your stock coil back on
>and
>wire the stock ignition to the stock coil and see what happens. I think
>it
>will be easier to isolate if you go back to basics.
>
>Ron
>00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
>For modifications see my DML Profile (URL follows)
>http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
>-----Original Message-----
>From: owner-dakota-truck@buffnet.net
>[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Chuong Nguyen
>Sent: Sunday, July 08, 2001 4:10 PM
>To: dakota-truck@buffnet.net
>Subject: DML: stumbling problem. new discovery..... MSD ??? ignition?
>
>
>Okay, HUGE problem with the MSD blaster 2 coil.
>
>I just unhooked the digital 6 ignition and ran my blaster 2 coil.. So...
>I
>go to the parts store to pick up a new coil wire and i just got it put on
>and I resoldered all my electrical connections and I drive to go get gas.
>IT stumbles BAD and barely makes it back home. I get home, hear a little
>electrical clicking noise, get out to look at the problem and see that
>there's voltage shooting out the top of the MSD blaster 2 coil and running
>down and hitting the (-) negative post on the blaster 2 coil. It seems
>sort
>of intermittent, so I'm gonna pull the wires and do an ohms check and if
>they all test out fine, I'm gonna go and try to get 3923 plugs (if one
>fouled, or messed up or something)
>
>I just threw on a new cap and rotor in hopes it was the problem, and I've
>rechecked all my spark plug wires and such. Hope it's just a bad
>connection
>somewhere again. Anyone have any thoughts?
>-Chuong
>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com
>
>
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:04 EDT