Re: RE: Help with ABS Problem

From: Brian Blater (blater@sisna.com)
Date: Fri Jul 20 2001 - 15:33:12 EDT


Thanks for everyone's suggestions. I did take the truck out last night and
if I apply the brakes hard the rear wheels will lock up. So, the ABS isn't
working (which is probably why the light is on.) However, that did not reset
the system. So, I will disconnect the battery and reset the PCM like
serveral have suggested.

Let me know if you find anything in the FSM.

Thanks
Brian B

""Wisotzkey, Rich"" <Rich.Wisotzkey@gd-wts.com> wrote in message
news:101620.13340.31393@news.twistedbits.net...> Brian,
> Just a wild guess here, but I think maybe you PCM is "hung" so to speak.
> Two things I can think of. Take the truck out and apply the brakes hard
> enough to activate the ABS and see if it resets itself. If not, try
> disconnecting the battery for a few minutes to reset the PCM. I'd try
this
> before I forked over my wallet to the mechanics.
>
> I have a '96 also. I'll try to check my FSM to see if it mentions this
> "phenomenon". :'B
> Rich - Ashburn, VA



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:10 EDT