All the easy stuff is available for a 4.7L....
Throttle bodies (Soon F&B Billet's apparently)
Intakes
Jet Chip
Headers
Thermostat
Plugs
Catback
What you can't do is change cams easily or put in Crower 1.7 rockers or R/T
heads or an M1 intake or any of those goodies. Also can't slip in better
plug wires and an simple MSD 6A or something similiar.
But stuff like that is coming someday (ignition will be expensive for a
coil on plug design). Cams will be higher because there are two of them.
But if all you are going to do is exhaust, TB, and intake, them the 4.7 is
not a limitation.
-STE
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:10 EDT